Oil Plus 2C - Citrine Yellow 100ml
3 in stock - contact us for bigger quantities
SA Argus Laser Supplies has partnered with Rubio Monocoat to bring you the most exciting in coloured wood oils.
Protects and colours your wood in one single layer
Rubio® Monocoat Oil Plus 2C is a product of the newest generation which colours your wood
and protects it in one layer. 1 Bottle of 100ml oil can cover 3-5m2.
∙ Colours and protects in 1 layer
∙ 40 standard colours that can be blended for unlimited possibilities
∙ Enhances the natural look and feel of the wood
∙ Environmentally friendly: 0% VOC!
∙ Does not contain any water or solvents
∙ Easy to maintain
∙ No overlaps or starting marks
∙ Durable protection
∙ Minimal use: 30 - 50 m2/L
∙ Can be applied to almost all wood types, furniture as well as floors (solid wood, veneer, MDF, ...)
∙ Very wear-resistant
∙ Water-resistant, ideal for kitchens and bathrooms
∙ Very fast curing: 80% in 2 days
∙ A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap
RMC Oil Plus 2C (A)
∙ Physical state at 20°C: liquid
∙ Odour: oily
∙ Flash point: > 99°C
∙ Density: > 0,9 kg/L
∙ VOC content: 0 g/L
The product can be stored up to 36 months in dry conditions and in its original packaging. Keep away from frost.
STEP 1. Untreated wood: sand the surface scratch-free. Vacuum thoroughly, eliminate remains of dust with RMC Cleaner.
STEP 2. Once the cleaned surface is dry, spread out a small quantity of RMC Oil Plus 2C (cloth or polishing machine with thin beige
pad). Work in zones of 5 - 10 m2.
STEP 3. Let absorb during a few minutes. Thoroughly remove all excess of oil (cloth or polishing machine with white pad) within
15 minutes per zone. The surface should feel dry! Finish all zones the same way.
STEP 4. In a well ventilated room, the surface can be used 24 - 36 hours after the application.
30 - 50 m2/L, depending on the wood type, sanding and application method. RMC Oil Plus 2C may be used for a maximum of
4 - 6 hours after mixing.
Remark: consumption industrial applications: 60 - 80 m2/L.
These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.
Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
Tips & tricks
∙ The product may NOT be diluted!
∙ Stir the product well before application. When using several containers at one site, it is recommended to mix them for an even
View the technical data sheet here